Products-eko-save
EKO COLD BLA
Can Clean Resins with a low working temperature and/or medium/high MFI.
WORKING TEMP: 150-270
MFI: 4*
ABRASION: 2**
FOAMING PRESURE:4***
CAN CLEAN: PU PVC PE PP Pigments
EKO H
Universal purging product. Easy to flush out of the line. Good for shutting machine down on.
WORKING TEMP: 160-280
MFI: 2*
ABRASION: 3**
FOAMING PRESURE:3***
CAN CLEAN: PP PE EVOH Pigments, burnt resin & black spots.
EKO WARM RICH
Universal product specialized for Injection and Hot Runners. Good for shutting machine down on.
WORKING TEMP: 160-290
MFI: 2*
ABRASION: 4**
FOAMING PRESURE:3***
CAN CLEAN:
EKO FILM W
Chemical and mechanical activity. Specialized for blown film.
WORKING TEMP: 160-280
MFI: 2*
ABRASION: 4**
FOAMING PRESURE:3***
CAN CLEAN: PP PE EVOH EVA Pigments, burnt resin & black spots.
EKO GGX NEW
Specialized for Extrusion.
WORKING TEMP: 160-280
MFI: 3*
ABRASION: 3**
FOAMING PRESURE: 5***
CAN CLEAN: PP PE PS ABS Pigments, burnt resin & black spots
EKO LIL
Chemical and mechanical activity. Specialized for extrusion color changing.
WORKING TEMP: 160-280
MFI: 2*
ABRASION: 5**
FOAMING PRESURE: 2***
CAN CLEAN: PE PP ABS HIPS Pigments, burnt resin & black spots.
EKO S
Abrasive and especially strong. Can clean “hard” burnt resin layers & To Delay Manuel cleaning. Reinforce EKO SAVE products.
WORKING TEMP: 180-300
MFI: 1*
ABRASION: 5**
FOAMING PRESURE: 3***
CAN CLEAN: Pigments & burnt resin layers
EKO G
For very high working temperature. Abrasive and strong.
WORKING TEMP: 160-340
MFI: 2*
ABRASION: 5**
FOAMING PRESURE: 0***
CAN CLEAN: PEEK ULTEM POLYSULFON Pigments & burnt resin layers
EKO WARM
Specialized for PA/PET cleaning. A “quiet” and super-efficient product.
WORKING TEMP: 210-320
MFI: 2*
ABRASION: 4**
FOAMING PRESURE: 0***
CAN CLEAN: PET PA PE Pigments, burnt resin & black spots.
EKO CLEAR NEW
Specialized for transparent products. Eliminates the phenomenon of “clouds”.
WORKING TEMP: 240-320
MFI: 2*
ABRASION: 4**
FOAMING PRESURE: 0***
CAN CLEAN: PC Acryl PS Pigments, burnt resin & black spots.
EKO 801
Widely used in all extrusion methods : Blow moldind,Blown film and hot runners injection.
Easy to insert and remove from the machine.
WORKING TEMP: 170-400
MFI: 4*
ABRASION: 5**
FOAMING PRESURE: 0***
CAN CLEAN: PET,PA,ULTEM,PEEK.
* 1 LOW LEVEL , 5 HIGH LEVEL.
** Suitable for hot runners with a diameter larger than 1 mm.
*** EKO SAVE™ materials with abrasion level 5 are prohibited in the use at
Injection molds and hot runners.